RB-P1 is available in 220 kg drums and 20 kg gallons.
Physical state: liquid
Density: Approximately 1.2 kg/l
Chloride content: According to standard
Minimum consumption temperature: 5 0C
A dosage range of 0.5kg to 1kg per 100kg cement is recommended as a starting point.
Note: don’t use more than 1.2 kg RB-P1 per 100 kg cement.
DIRECTION FOR USE
RB-P1 should be added to the concrete mix during the mixing cycle at the same time as the water and the aggregates. The maximum effect is achieved when the RB-P1 is added after the addition of 50 to 70 % of the water. Never add RB-P1 to the dry cement. Keep mixing at high rate for 60 seconds in order to complete mixing.
RB-P1 should be stored in original containers and at above 5 degrees Centigrade. If frozen gradually thaw and agitate until completely reconstituted.
RB-P1 is not a fire or health hazard. Spillages should be washed down immediately with cold water. For further information refer to the material safety data sheet.