RB-NP is available in 250 kg drums and 20 kg gallons.
Physical state: liquid
Density: Approximately 1.19 kg/l
Chloride content: according to standard
Minimum consumption temperature: 50C
A dosage range of 0.6 kg to 1.2 kg per 100 kg cement is recommended as a starting point.
DIRECTION FOR USE
RB-NP should be added to the concrete mix during the mixing cycle at the same time as the water and the aggregates. The maximum effect is achieved when the RB-FM is added after the addition of 50 to 70 % of the water. Never add RB-NP to the dry cement. Keep mixing at high rate for 60 seconds in order to complete mixing. RB-NP can be used with all types of Portland cement, including sulphate resisting.
It should not be premixed with other admixtures. If other admixtures are to be used they must be dispensed separately.
RB-NP should be stored in original containers and at above 5 degrees Centigrade. If frozen gradually thaw and agitate until completely reconstituted.
RB-NP is not a fire or health hazard. Spillages should be washed down immediately with cold water. For further information refer to the material safety data sheet.