RB-GMA50 is a non-shrinkage gel form adhesive with various applications to bond threaded steel rod or reinforcing bars into the anchor hole. This creates excellent adhesion to construction materials and get harden quickly. This has excellent mechanical and chemical stability.
DIRECTION FOR USE
Use drill to create the holes (according to calculation). The holes must be dry and free of dust, grease and oil.
First shake each component and then add B component to A component. Continue mixing for 3 minutes in suitable revolution (400 rev/min) using stirrer (until a homogeneous mixture is obtained. for smaller amounts, mix cone cup of B with 1 cup of A. notice that mixing should be done in a metal container. fill two-thirds of hole volume with the mixture and then insert the bolt into the hole. remove extra mixture from the hole around. the concrete must be 21 to 28 days. it depends on drying and curing condition.
Whole tools must be cleaned at the end of operation. Remove harden materials mechanically
.Product must be stored in original containers and protect from sunlight and rain
Consumption depends on the pore size. The final volume of mixture for each 4 kg pack is 2.5 liters at 25 0C.
This product may damage the skin. Use safety equipment such as gloves and glasses. in case of contact with skin and eye, wash with plenty of water.