تولید کننده برتر تمامی افزودنی های بتن
تماس بگیرید
CHARACTERISTICS:
HYPERDESMO-CLASSIC is a simple and economic solution for waterproofing and protection. It is a one component, low viscosity, polyurethane fluid which cures with the humidity in the atmosphere to produce a highly elastic membrane with strong adhesion to many types of surfaces. It is based on pure elastomeric hydrophobic polyurethane resin plus special inorganic fillers, which result in excellent mechanical, chemical, thermal, UV and natural element resistance properties. Apply with brush, roller or airless spraying in two coats. Minimum total consumption: 1.2-1.5 kg/m2.
Waterproofing and protection of:
LIMITATIONS:
Not recommended for:
When used in dark colors for exposed use, a protective topcoat of HYPERDESMO-ADY-E (always pigmented) is required
Can be successfully applied on:
Concrete, fibrous cement, mosaic, cement roof tiles, old (but well adhered) acrylic and asphalt coats, wood, corroded metal, and galvanized steel. For information about other substrates, please contact our tech department.
Concrete substrate conditions (standard):
Primer selection for special conditions and substrates: Please refer to the Primer Selection Table.
Clean the surface using a high pressure washer, if possible. Remove oil, grease and wax contaminants. Cement laitance, loose particles, mould release agents, cured membranes must be removed. Fill surface irregularities with the necessary product.
Priming:
Apply the required primer following the guidelines above.
Mixing:
Use a low speed (300 rpm) mixer. May optionally be thinned with 5-10% SOLVENT-01. For application by spraying (airless) thin with 10% SOLVENT-01.
Application:
Apply the material with roller or brush in two, at least, coats. Leave 6-24 hours between coats. If more time passes (for example more than 4 days) or if you are unsure of the interlayer adhesion, use UNIVERSAL PRIMER-2K-4060.
First coat: 0.6-0.8 kg/m2.
Second coat: 0.6-0.9 kg/m2.
Minimum total consumption: 1.2-1.5 kg/m2.
Clean tools and equipment first with paper towels and then using SOLVENT-01. Rollers will not be re-usable.
1 kg, 6 kg, 15 kg, 25 kg and 200 kg drums.
Can be kept for minimum 12 months in the original unopened pails in dry places and at temperatures of 5-25 oC. Once a pail has been opened, use as soon as possible.
Contains volatile flammable solvents. Apply in well-ventilated, no smoking areas, away from naked flames. In closed spaces use ventilators and carbon active masks. Keep in mind that solvents are heavier than air so they creep on the floor. The MSDS (Material Safety Data Sheet) is available on request.
| APPROVAL | ||
| REQUIREMENT | HYPERDESMO | HYPERDESMO + HYPERDESMO-ADY |
| Minimum expected working life | W3 (25 years) | W2 (10 years) |
| Climatic zone | S (Severe) | |
| User load | P1 | P3 |
| Roof slope | S1-S4 | |
| Minimum surface temperature | TL3 (-20 οC) | |
| Maximum surface temperature | TH4 (90 οC) | TH3 (80 οC) |
| Exposure to external fire | Broof (t1) | |
| Reaction to fire | Class F | |
The product in liquid form (before application): 95% dry matter in Xylol.
| PROPERTY | UNITS | METHOD | SPECIFICATION |
| Viscosity (BROOKFIELD) | cp | ASTM D2196-86, @ 25 oC | 3000-6000 |
| Specific weight | gr/cm3 | ASTM D1475 / DIN 53217 / ISO 2811,
@ 20oC |
1.3-1.4 |
| Flash point | oC | ASTM D93, closed cup | 42 |
| Tack free time, @ 77 oF (25oC) & 55% RH | hours | – | 4 |
| Recoat time | hours | – | 6-24 |
The cured membrane:
| PROPERTY | UNITS | METHOD | SPECIFICATION |
| Service temperature | oC | – | -40 to 80 |
| Max. temperature short time (shock) | oC | – | 200 |
| Hardness | Shore A | ASTM D2240 / DIN 53505 / ISO R868 | 60 |
| Tensile strength at break @ 23 oC | Kg/cm2 (N/mm2) | ASTM D412 / EN-ISO-527-3 | 55 |
| Percent elongation @ 23 oC | % | ASTM D412 / EN-ISO-527-3 | > 300 |
| Water vapor transmission | gr/m2.hr | ASTM E96 (Water Method) | 0.8 |
| Adhesion to concrete | Kg/cm2 (N/mm2) | ASTM D4541 | > 20 (> 2) |
| QUV Accelerated Weathering Test (4hr UV, @ 60 oC (UVB- Lamps) & 4hr COND @ 50
oC) |
– |
ASTM G53 |
passed (2000 hours) |
| Hydrolysis (8% KOH, 15 days @ 50°C) |
– |
– |
no significant elastomeric property change |
| Hydrolysis (H2O, 14-day cycle RT-100 °C) |
– |
– |
no significant elastomeric property change |
| Hydrolysis (H2O, 30-day cycle 60-100 °C) |
– |
– |
no significant elastomeric property change |
|
HCL (PH=2, 10 days @ RT) |
– |
– |
no significant elastomeric property change |
| Thermal resistance (100 days @ 80 °C) | – | EOTA TR011 | passed |
Reviews
There are no reviews yet.